Publications

Unconventional Oil & Gas

Publications

Unconventional Oil & Gas

Technical Publication
ISO Standardization as an Enabler for Production Efficiency in the Operating Phase
Upstream Oil & Gas | Conventional/Heavy Oil | Equipment Health Monitoring | Unconventional Oil & Gas | Equipment Reliability
Consistent feedback on factors affecting production loss is key to monitoring production performance and drive improvements in production efficiency of […]
Technical Publication
Developing an Evaluation Method for Casing Connections used in Hydraulically Fractured Wells
Upstream Oil & Gas | Structural Integrity | Unconventional Oil & Gas | Well Design and Construction
Hydraulic fracturing as a means to stimulate production has become an effective way to extract oil and gas from low-porosity, […]
Technical Publication
Moving Beyond Rules of Thumb
Upstream Oil & Gas | Artificial Lift | Thermal Bitumen (SAGD/CSS) | Unconventional Oil & Gas | Well Design and Construction | Well Operations
The percentage of oil and gas fields being developed with high curvature and horizontal wellbores continues to increase throughout the […]
Technical Publication
Evaluation of Horizontal Liner Installation Loads Using Advanced Numerical Simulation Technique
Upstream Oil & Gas | Structural Integrity | Thermal Bitumen (SAGD/CSS) | Unconventional Oil & Gas | Well Design and Construction
Horizontal wells have been widely used to significantly increase reservoir exposure in a wide range of conventional and unconventional oil […]
Technical Publication
Accelerated Learning Through Collaboration in a PCP Application: An Australian Case Study
Upstream Oil & Gas | Artificial Lift | Unconventional Oil & Gas | Equipment Reliability | Well Operations
Four major operators with significant coal seam gas (CSG) holdings in Queensland, Australia identified Progressing Cavity Pumps (PCPs) as one […]
Technical Publication
Assessment and Prediction of Erosion in Completion Systems under Hydraulic Fracturing Operations Using Computational Fluid Dynamics
Upstream Oil & Gas | Flow & Heat Transfer | Structural Integrity | Unconventional Oil & Gas | Equipment Reliability | Well Operations
High rate injection or production of fluids with sand particles places wellhead components and downhole assemblies at risk of erosion […]