PCP Course Announcement - 2026 North America | C-FER TECHNOLOGIES

Insight

PCP Course Announcement – 2026 North America

North America PCP Course: Design Smarter, Optimize Faster with PC‑PUMP

C‑FER Technologies’ Progressive Cavity Pump (PCP) training is scheduled for North American time zones, blending PCP system design fundamentals with hands‑on PC‑PUMP® software instruction. Built for operators, engineers, and vendors, the course covers PCP theory, system design and analysis, troubleshooting, and practical workflows in PC‑PUMP so you can confidently design, analyze, and optimize your PCP systems.

Explore design theory, tackle equipment selection, overcome design
challenges, improve system optimization, and strengthen your PCP expertise.

Interested in learning more about PC-PUMP?

Want to learn more about how we can help? We want to connect with you.

Introduction to PCP Design and Optimization using PC-PUMP

North America

Date and Time:
June 8, 2026 through June 11, 2026
8:30am – 11:30am MDT each day

Explore More

Limit States Design for Onshore Pipelines: Design Rules for Operating Pressure and Equipment Impact Loads

Reliability-based design rules have been developed for the key ultimate limit states applicable to onshore pipeline, including burst under operating […]

Quantitative Risk Assessment: Underground Natural Gas Storage Facilities

Pipelines | Quantitative Risk Assessment | Structural Integrity | Underground Storage | Pipeline and Facility Integrity

TransGas undertook a risk-ranking project for storage facilities as the first step in the process of evaluating the financial and […]

Dealing With Knowledge Uncertainties in Pipeline Reliability Based Design and Assessment

Pipelines | Reliability-based Design and Assessment | Pipeline Design and Operation

Knowledge uncertainties result from limitations of the data and other information required to define parameters that are used in estimating […]

Evaluating Connection Challenges

Upstream Oil & Gas | Thermal Bitumen (SAGD/CSS) | Well Design and Construction

Kirk Hamilton, C-FER Technologies, reviews the evolutionary challenges of today’s oilfield from an OCTG connection evaluation perspective.As multi-fractured horizontal wells […]

Deep Well Simulator

Upstream Oil & Gas | Artificial Lift | Structural Integrity | Underground Storage | Well Design and Construction | Well Operations

Simulating Bottomhole Service Conditions C-FER Technologies’s Deep Well Simulator (DWS) is used to develop and test a wide range of […]

Testing requirements for strain-based design in northern environments

Large ground movements around pipelines caused by freeze-thaw cycles in northern climates can cause stresses that exceed the yield strength […]